I’m in a real bind.
I just cloned by 256GB SSD to a 1TB SSD. The cloning part happened without a hitch - I then swapped drives.
To my horror the PC will not boot reliably, meaning:
- It worked fine on the very first boot after instalation of the new drive
- On reboot it failed with the following message “Reboot and select proper boot device or insert boot media in selected boot device and press a key”
- I jumped into the BIOS and the drive is not detected
- But if I press F11 on boot, It does allow me to select the SSD and then boots fine.
In other words the only way I can boot at the moment is to press F11 every time I fire up my PC.
Any idea how to fix that before I loose my mind?